Introduction

Emerson offers software upgrade capability for your TV using USB portable memory. After you have completed the software upgrade, your TV will typically perform better. What improvements are made depends on the software you are using as well as the software your TV contained before the upgrade. You can execute the software upgrade procedure your- self. Be aware that the content of this document is addressing technical and software skilled users.

Preparing a portable memory for software upgrade.

For the procedure you will require:
> Apersonal computer with web browsing capability
> An archive utility that supports the ZIP-format (e.g. WinZip for windows or Stufflt for Mac OS).
> Apreferably empty USB memory stick.
Note: Only FAT/DOS formatted portable memory is supported.

Firmware upgrade procedure:

Step 1

Select the Model Number of your TV on the Left side of this webpage

Step 2

Select the option that contains the first 3 digits of your serial number The serial number can be found on the back panel of your television set and on the front cover of your instruction manual. Please note: If you do not see your serial number prefix listed, no software upgrade is available as this time.

Save the *.ecc file and load it to the root directory of a USB removable memory drive. Example of root directory would be “E:\”.

Step 3

Unplug the TV from the AC outlet.

Step 4

Insert the USB drive into the set.

Step 5

Plug the set into the AC outlet.

Step 6

If the update does not automatically start, press the power button on the remote or on the set keyboard.
Do not unplug the TV or send a remote command to the TV while the update is in progress as this will damage the TV.

Step 7

When the Software Upgrade Complete screen appears, remove the USB drive, unplug the TV from the AC outlet, then wait for 30 seconds before re-plugging.